10 PCS 900M-T-1.2D Small D Type Lead-free Electric Welding Soldering Iron Tips
10 PCS 900M-T-1.2D Small D Type Lead-free Electric Welding Soldering Iron Tips
In stock
Couldn't load pickup availability
-
This item is dispatched in 1 - 3 days
-
6 months fault protection. We back all products with a 6 months guarantee.
Order in the next 0 hours 0 minutes to get it by /10/2025
Guaranteed Safe Checkout
Guaranteed Safe Checkout
1. The soldering iron head is the heat conducting part of the welding table. It mainly consists of four metal materials: copper, iron, nickel, chromium and tin.
- Copper, as a heat conductor, is the main component of the soldering iron head. About 85% of the soldering iron head materials, copper has good thermal conductivity, which is conducive to the rapid heating of the soldering iron head. Good soldering iron heads are made of copper, but some manufacturers use brass, in order to reduce costs, but also reduce the thermal conductivity of the soldering iron head. Iron, which acts as an anticorrosion, is the key factor affecting the service life of the iron head. Good soldering iron head has fine and dense crystal structure and good corrosion resistance. This soldering iron head has long service life and good tin effect. Manufacturers with poor iron plating technology mainly rely on the thickness of the iron plating layer to control the service life of the iron head. Usually, the iron plating layer is thicker and the iron head is not tin, thin and durable. Nickel - plays an anti rust role in iron plating, and is convenient for subsequent chromium plating. Chromium - non stick tin prevents the use of tin to run on the iron head. The general chrome plated time is more than 5 minutes, and the ordinary decorative chrome plating is about 1 minutes. Tin - in the head, in the use of sticky tin parts. This is the composition of the iron head material, indispensable.
2. Keep welding head clean.
-Wipe the solder, tin and oxide on the welding head with a special wet sponge. After each use, it is necessary to clean the oxide on the welding head and add new tin on the tin plating layer of the welding head.
3. Keep the tin on the welding head.
- This can reduce the oxidation chance of the welding head and make the welded iron head more durable. After use, the new tin layer should be coated only after the humidity of the solder iron is slightly reduced, and the right-to-use tin plating layer can achieve better anti-oxidation effect.
4. Choose low active flux.
- The flux with high activity or strong corrosiveness will accelerate the corrosion of soldering iron head when heated, so low corrosive flux should be selected.
5. Clean up oxides immediately.
- When part of tin plating layer contains black oxide or rust, it is possible to make the welding iron head tin free and unable to carry out welding work. If tin oxide is found not to be added to tin, it must be cleaned at once.
6. Choose the right soldering iron head.
- It is very important to choose the correct size and shape of the welded iron head. Choosing the appropriate welded iron head can make the work more efficient and increase the durability of the welded iron head. Choosing the wrong welding head will affect the efficiency of welding iron, and the quality of welding will also be reduced.
- The size of the welded iron head is directly related to the thermal capacity. The larger the welded iron head is, the larger the thermal capacity is, the smaller the welded iron head is, and the smaller the thermal capacity is. When continuous welding is carried out, the bigger the welding iron head is, the lower the temperature drop is. In addition, because of the high thermal capacity of the large welding iron head, it is not easy to oxidize when the welding iron head can be used at a lower temperature, thus increasing its service life.
The short and thick welding iron head has long heat transfer and small welding iron head, and is more durable. Flat, blunt iron heads can transmit more heat than sharp iron heads. Generally speaking, the size of soldering head is not affected by adjacent elements. Selecting the geometry dimensions that can fully contact with the solder joints can improve the welding efficiency.
✓ FREE SHIPPING - No shipping fees charged
✓ International Delivery - Ships from our overseas warehouse
✓ Processing Time - 1-3 days handling time
✓ Estimated Delivery - 6-13 business days total
How It Works:
- Orders placed before 2:00 PM SAST (Monday-Friday) begin processing the same day
- Orders after 2:00 PM or on weekends/holidays process the next business day
- Delivered via private courier with SMS, email, and WhatsApp tracking updates
- If courier cannot reach you, order may be sent to nearest PAXI collection point
- Shipping insurance included in your product price
Customs & Duties Information:
Orders up to R2000:
✓ Delivered Duty Paid (DDP) - The price you see is the final price you pay
✓ We handle all import duties, taxes, and customs clearance fees
✓ No surprise charges upon delivery
Orders over R2000:
⚠️ You will be responsible for any import duties, taxes, and customs clearance fees upon delivery
Note: Your ID information may be required for customs clearance to ensure smooth delivery.
At PMC TechLife, we are committed to ensuring our customers are satisfied with their purchases. Our return policy is designed to be transparent, fair, and fully compliant with South African consumer protection laws, including the Consumer Protection Act (CPA) and the Electronic Communications and Transactions Act (ECTA).
We offer distinct return processes based on the reason for your return. Please read the following sections carefully to understand your rights and the procedures for returning an item.
1. Your Right to Return Defective or Faulty Goods (6-Month Warranty)
In accordance with the Consumer Protection Act, if any product you receive is defective, faulty, unsafe, or of poor quality, you have 6 months from the date of delivery to return it. In such cases, you are entitled to a full refund, a replacement, or a repair of the item, at your choice. We will cover all costs associated with the return shipping for defective items.
To be eligible for a defective goods return:
- The return must be logged within 6 months of delivery.
- The item should be returned with all parts and original packaging where possible. We understand that discovering a defect may require opening the packaging or breaking a seal; returns for defective items will be accepted even if opened.
- Our inspection must confirm the issue was a manufacturing defect and not caused by customer misuse, improper installation, or normal wear and tear.
2. Your Right to a 'Cooling-Off' Return (Change of Mind)
In line with the Electronic Communications and Transactions Act for online purchases, you have a 7-day 'cooling-off' period. If you change your mind or ordered incorrectly, you have 7 days from the date of delivery to request a return for a refund or exchange.
To be eligible for a 'change of mind' return:
- The item must be in its original, as-new, and resalable condition, unworn and unused.
- The item must be returned in its original packaging, with all original tags and accessories included. You may open the packaging to inspect the item, but it must be returned undamaged.
- The customer is responsible for the cost of return shipping.
- Important: There are no handling or restocking fees for change-of-mind returns. You will be refunded the full purchase price, as the law grants you the right to cancel "without penalty."
3. How to Start a Return
To initiate any return, please follow these steps:
- Visit our dedicated returns portal: pmctechlife.returnscenter.com.
- Enter your order number and the email address used for the purchase.
- Follow the prompts to select the item(s) you wish to return and the reason for the return.
Once your request is submitted, we will review it. If your return is accepted, we will send you instructions on how and where to send your package. Items sent back to us without first requesting and receiving authorisation will not be accepted.
4. Exceptions & Non-Returnable Items
Please note that for 'change of mind' reasons, we cannot accept returns on the following:
- Gift cards
- Custom-ordered or personalized items
- Items specified as non-returnable for hygiene reasons (e.g., roll-on products, clothing, and personal care goods).
This does not affect your statutory right to return any item (including sale items) that is defective or faulty within 6 months of delivery.
5. Specific Product Notes
- LCD Screens: To prevent damage during installation, we strongly recommend that our LCD screens are installed by a qualified professional technician. Damage caused by improper installation is not covered under the 6-month warranty for manufacturing defects. If you believe an LCD screen was faulty upon arrival, providing an invoice from a technician can help expedite the assessment of your return claim.
- Spare Parts: Spare parts products cannot be returned if they have been installed on a mobile phone and are found to be working after installation. This does not affect your rights if the part was defective upon arrival.
6. Exchanges
The fastest way to ensure you get what you want is to return the item you have following the process above. Once the return is accepted and processed, you can make a separate purchase for the new item.
7. Refunds
We will notify you once we’ve received and inspected your return and let you know if the refund was approved based on the policy conditions. If approved, we will issue the refund to your original payment method within 5-7 business days. Please note that it may take additional time for your bank or credit card company to process and post the refund to your account.
8. Cancellation Policy
You can request to cancel your order by emailing us at sales@pmcjewellery.co.za.
- Before Shipping: We can only guarantee cancellation if your order has not yet been shipped.
- After Shipping: Once an order has shipped, it cannot be cancelled. If you wish to return the order, you must wait to receive it and then initiate a return through our portal. Such returns will be treated as 'Change of Mind' returns.
You can always contact us for any return questions at our help center.
Description
Description
1. The soldering iron head is the heat conducting part of the welding table. It mainly consists of four metal materials: copper, iron, nickel, chromium and tin.
- Copper, as a heat conductor, is the main component of the soldering iron head. About 85% of the soldering iron head materials, copper has good thermal conductivity, which is conducive to the rapid heating of the soldering iron head. Good soldering iron heads are made of copper, but some manufacturers use brass, in order to reduce costs, but also reduce the thermal conductivity of the soldering iron head. Iron, which acts as an anticorrosion, is the key factor affecting the service life of the iron head. Good soldering iron head has fine and dense crystal structure and good corrosion resistance. This soldering iron head has long service life and good tin effect. Manufacturers with poor iron plating technology mainly rely on the thickness of the iron plating layer to control the service life of the iron head. Usually, the iron plating layer is thicker and the iron head is not tin, thin and durable. Nickel - plays an anti rust role in iron plating, and is convenient for subsequent chromium plating. Chromium - non stick tin prevents the use of tin to run on the iron head. The general chrome plated time is more than 5 minutes, and the ordinary decorative chrome plating is about 1 minutes. Tin - in the head, in the use of sticky tin parts. This is the composition of the iron head material, indispensable.
2. Keep welding head clean.
-Wipe the solder, tin and oxide on the welding head with a special wet sponge. After each use, it is necessary to clean the oxide on the welding head and add new tin on the tin plating layer of the welding head.
3. Keep the tin on the welding head.
- This can reduce the oxidation chance of the welding head and make the welded iron head more durable. After use, the new tin layer should be coated only after the humidity of the solder iron is slightly reduced, and the right-to-use tin plating layer can achieve better anti-oxidation effect.
4. Choose low active flux.
- The flux with high activity or strong corrosiveness will accelerate the corrosion of soldering iron head when heated, so low corrosive flux should be selected.
5. Clean up oxides immediately.
- When part of tin plating layer contains black oxide or rust, it is possible to make the welding iron head tin free and unable to carry out welding work. If tin oxide is found not to be added to tin, it must be cleaned at once.
6. Choose the right soldering iron head.
- It is very important to choose the correct size and shape of the welded iron head. Choosing the appropriate welded iron head can make the work more efficient and increase the durability of the welded iron head. Choosing the wrong welding head will affect the efficiency of welding iron, and the quality of welding will also be reduced.
- The size of the welded iron head is directly related to the thermal capacity. The larger the welded iron head is, the larger the thermal capacity is, the smaller the welded iron head is, and the smaller the thermal capacity is. When continuous welding is carried out, the bigger the welding iron head is, the lower the temperature drop is. In addition, because of the high thermal capacity of the large welding iron head, it is not easy to oxidize when the welding iron head can be used at a lower temperature, thus increasing its service life.
The short and thick welding iron head has long heat transfer and small welding iron head, and is more durable. Flat, blunt iron heads can transmit more heat than sharp iron heads. Generally speaking, the size of soldering head is not affected by adjacent elements. Selecting the geometry dimensions that can fully contact with the solder joints can improve the welding efficiency.
Delivery Process
Delivery Process
✓ FREE SHIPPING - No shipping fees charged
✓ International Delivery - Ships from our overseas warehouse
✓ Processing Time - 1-3 days handling time
✓ Estimated Delivery - 6-13 business days total
How It Works:
- Orders placed before 2:00 PM SAST (Monday-Friday) begin processing the same day
- Orders after 2:00 PM or on weekends/holidays process the next business day
- Delivered via private courier with SMS, email, and WhatsApp tracking updates
- If courier cannot reach you, order may be sent to nearest PAXI collection point
- Shipping insurance included in your product price
Customs & Duties Information:
Orders up to R2000:
✓ Delivered Duty Paid (DDP) - The price you see is the final price you pay
✓ We handle all import duties, taxes, and customs clearance fees
✓ No surprise charges upon delivery
Orders over R2000:
⚠️ You will be responsible for any import duties, taxes, and customs clearance fees upon delivery
Note: Your ID information may be required for customs clearance to ensure smooth delivery.
Refunds & Returns
Refunds & Returns
At PMC TechLife, we are committed to ensuring our customers are satisfied with their purchases. Our return policy is designed to be transparent, fair, and fully compliant with South African consumer protection laws, including the Consumer Protection Act (CPA) and the Electronic Communications and Transactions Act (ECTA).
We offer distinct return processes based on the reason for your return. Please read the following sections carefully to understand your rights and the procedures for returning an item.
1. Your Right to Return Defective or Faulty Goods (6-Month Warranty)
In accordance with the Consumer Protection Act, if any product you receive is defective, faulty, unsafe, or of poor quality, you have 6 months from the date of delivery to return it. In such cases, you are entitled to a full refund, a replacement, or a repair of the item, at your choice. We will cover all costs associated with the return shipping for defective items.
To be eligible for a defective goods return:
- The return must be logged within 6 months of delivery.
- The item should be returned with all parts and original packaging where possible. We understand that discovering a defect may require opening the packaging or breaking a seal; returns for defective items will be accepted even if opened.
- Our inspection must confirm the issue was a manufacturing defect and not caused by customer misuse, improper installation, or normal wear and tear.
2. Your Right to a 'Cooling-Off' Return (Change of Mind)
In line with the Electronic Communications and Transactions Act for online purchases, you have a 7-day 'cooling-off' period. If you change your mind or ordered incorrectly, you have 7 days from the date of delivery to request a return for a refund or exchange.
To be eligible for a 'change of mind' return:
- The item must be in its original, as-new, and resalable condition, unworn and unused.
- The item must be returned in its original packaging, with all original tags and accessories included. You may open the packaging to inspect the item, but it must be returned undamaged.
- The customer is responsible for the cost of return shipping.
- Important: There are no handling or restocking fees for change-of-mind returns. You will be refunded the full purchase price, as the law grants you the right to cancel "without penalty."
3. How to Start a Return
To initiate any return, please follow these steps:
- Visit our dedicated returns portal: pmctechlife.returnscenter.com.
- Enter your order number and the email address used for the purchase.
- Follow the prompts to select the item(s) you wish to return and the reason for the return.
Once your request is submitted, we will review it. If your return is accepted, we will send you instructions on how and where to send your package. Items sent back to us without first requesting and receiving authorisation will not be accepted.
4. Exceptions & Non-Returnable Items
Please note that for 'change of mind' reasons, we cannot accept returns on the following:
- Gift cards
- Custom-ordered or personalized items
- Items specified as non-returnable for hygiene reasons (e.g., roll-on products, clothing, and personal care goods).
This does not affect your statutory right to return any item (including sale items) that is defective or faulty within 6 months of delivery.
5. Specific Product Notes
- LCD Screens: To prevent damage during installation, we strongly recommend that our LCD screens are installed by a qualified professional technician. Damage caused by improper installation is not covered under the 6-month warranty for manufacturing defects. If you believe an LCD screen was faulty upon arrival, providing an invoice from a technician can help expedite the assessment of your return claim.
- Spare Parts: Spare parts products cannot be returned if they have been installed on a mobile phone and are found to be working after installation. This does not affect your rights if the part was defective upon arrival.
6. Exchanges
The fastest way to ensure you get what you want is to return the item you have following the process above. Once the return is accepted and processed, you can make a separate purchase for the new item.
7. Refunds
We will notify you once we’ve received and inspected your return and let you know if the refund was approved based on the policy conditions. If approved, we will issue the refund to your original payment method within 5-7 business days. Please note that it may take additional time for your bank or credit card company to process and post the refund to your account.
8. Cancellation Policy
You can request to cancel your order by emailing us at sales@pmcjewellery.co.za.
- Before Shipping: We can only guarantee cancellation if your order has not yet been shipped.
- After Shipping: Once an order has shipped, it cannot be cancelled. If you wish to return the order, you must wait to receive it and then initiate a return through our portal. Such returns will be treated as 'Change of Mind' returns.
You can always contact us for any return questions at our help center.
