Waveshare XCore407I, STM32F4 Core Board
Waveshare XCore407I, STM32F4 Core Board
In stock
-
This item is dispatched in 1 - 3 days
-
6 months fault protection. We back all products with a 6 months guarantee.
Order in the next 0 hours 0 minutes to get it by /10/2025
Couldn't load pickup availability
Guaranteed Safe Checkout
Guaranteed Safe Checkout
1. XCore407I is an STM32 MCU core board that features the STM32F407IGT6 on board.
2. Clock circuit, USB power management
3. Onboard devices: USB HS PHY, Ethernet PHY, 1G Bit NandFlash
4. Connectors:USB HS (mini / type A), USB FS (mini), Ethernet (RJ45)
5. All the idle I/O ports are accessible on the pin headers
6. 2.0mm pin header pitch, smaller size, easier to integrate into user system
7. Note : please consider the EVK407I, which supports easily programing/debugging.
What is On Board
STM32F407IGT6 development board on board resource
1. STM32F407IGT6: The high performance STM32 MCU which features:
- Core: Cortex-M4 32-bit RISC
- Feature: a full set of single-cycle DSP instructions
- Operating Frequency: 168MHz, 210 DMIPS/1.25 DMIPS/MHz
- Operating Voltage: 1.8V-3.6V
- Package: LQFP176
- Memories: 1024kB Flash, 192+4kB SRAM
- MCU communication Interfaces:
-- 3 x SPI, 4 x USART, 2 x UART, 2 x I2S, 3 x I2C
-- 1 x FSMC, 1 x SDIO, 2 x CAN
-- 1 x USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, ULPI and on-chip full-speed PHY
-- 1 x 10/100 Ethernet MAC
-- 1 x 8 to 14-bit parallel camera interface
- AD & DA converters: 3 x AD (12-bit, 1μs, shares 24 channels); 2 x DA (12-bit)
- Debugging/Programming: supports JTAG/SWD (serial wire debug) interfaces, supports IAP
2. MIC2075-2, onboard USB FS power management device
3. AMS1117-3.3, 3.3V voltage regulator
4. K9F1G08U0E, 1G Bit NandFlash
5. DP83848, Ethernet PHY
6. MIC2075-1, onboard USB HS power management device
7. USB3300, USB HS PHY
8. Power supply switch, powered from 5Vin or USB connection
9. Boot mode switch, for configuring BOOT0 pin
10. Power indicator
11. USB FS LED
12. USB HS LED
13. Reset button
14. 8M crystal, MCU clock, enables the MCU run at higher speed by frequency multiplication
15. 24M crystal, USB3300 clock
16. 50M crystal, DP83848 clock
17. 32.768K crystal, for internal RTC with calibration
18. Ethernet connector
19. USB FS mini connector
20. USB HS mini connector
21. USB HS type A connector
22. MCU pins expander, VCC, GND and all the idle I/O ports are accessible on expansion connectors for further expansion
23. USB OTG/HOST jumper
24. VREF/VBAT jumper
25. Ethernet I/O selection solder joint
26. USB HS I/O selection solder joint
27. PDR selection solder joint: 1.8-3.6V, -40~105℃ OR 1.7-3.6V, 0~70℃
Package Contents
1. XCore407I development board x 1
2. USB type A to Mini-B cable x 1
3. Software CD x 1
✓ FREE SHIPPING - No shipping fees charged
✓ International Delivery - Ships from our overseas warehouse
✓ Processing Time - 1-3 days handling time
✓ Estimated Delivery - 6-13 business days total
How It Works:
- Orders placed before 2:00 PM SAST (Monday-Friday) begin processing the same day
- Orders after 2:00 PM or on weekends/holidays process the next business day
- Delivered via private courier with SMS, email, and WhatsApp tracking updates
- If courier cannot reach you, order may be sent to nearest PAXI collection point
- Shipping insurance included in your product price
Customs & Duties Information:
Orders up to R2000:
✓ Delivered Duty Paid (DDP) - The price you see is the final price you pay
✓ We handle all import duties, taxes, and customs clearance fees
✓ No surprise charges upon delivery
Orders over R2000:
⚠️ You will be responsible for any import duties, taxes, and customs clearance fees upon delivery
Note: Your ID information may be required for customs clearance to ensure smooth delivery.
At PMC TechLife, we are committed to ensuring our customers are satisfied with their purchases. Our return policy is designed to be transparent, fair, and fully compliant with South African consumer protection laws, including the Consumer Protection Act (CPA) and the Electronic Communications and Transactions Act (ECTA).
We offer distinct return processes based on the reason for your return. Please read the following sections carefully to understand your rights and the procedures for returning an item.
1. Your Right to Return Defective or Faulty Goods (6-Month Warranty)
In accordance with the Consumer Protection Act, if any product you receive is defective, faulty, unsafe, or of poor quality, you have 6 months from the date of delivery to return it. In such cases, you are entitled to a full refund, a replacement, or a repair of the item, at your choice. We will cover all costs associated with the return shipping for defective items.
To be eligible for a defective goods return:
- The return must be logged within 6 months of delivery.
- The item should be returned with all parts and original packaging where possible. We understand that discovering a defect may require opening the packaging or breaking a seal; returns for defective items will be accepted even if opened.
- Our inspection must confirm the issue was a manufacturing defect and not caused by customer misuse, improper installation, or normal wear and tear.
2. Your Right to a 'Cooling-Off' Return (Change of Mind)
In line with the Electronic Communications and Transactions Act for online purchases, you have a 7-day 'cooling-off' period. If you change your mind or ordered incorrectly, you have 7 days from the date of delivery to request a return for a refund or exchange.
To be eligible for a 'change of mind' return:
- The item must be in its original, as-new, and resalable condition, unworn and unused.
- The item must be returned in its original packaging, with all original tags and accessories included. You may open the packaging to inspect the item, but it must be returned undamaged.
- The customer is responsible for the cost of return shipping.
- Important: There are no handling or restocking fees for change-of-mind returns. You will be refunded the full purchase price, as the law grants you the right to cancel "without penalty."
3. How to Start a Return
To initiate any return, please follow these steps:
- Visit our dedicated returns portal: pmctechlife.returnscenter.com.
- Enter your order number and the email address used for the purchase.
- Follow the prompts to select the item(s) you wish to return and the reason for the return.
Once your request is submitted, we will review it. If your return is accepted, we will send you instructions on how and where to send your package. Items sent back to us without first requesting and receiving authorisation will not be accepted.
4. Exceptions & Non-Returnable Items
Please note that for 'change of mind' reasons, we cannot accept returns on the following:
- Gift cards
- Custom-ordered or personalized items
- Items specified as non-returnable for hygiene reasons (e.g., roll-on products, clothing, and personal care goods).
This does not affect your statutory right to return any item (including sale items) that is defective or faulty within 6 months of delivery.
5. Specific Product Notes
- LCD Screens: To prevent damage during installation, we strongly recommend that our LCD screens are installed by a qualified professional technician. Damage caused by improper installation is not covered under the 6-month warranty for manufacturing defects. If you believe an LCD screen was faulty upon arrival, providing an invoice from a technician can help expedite the assessment of your return claim.
- Spare Parts: Spare parts products cannot be returned if they have been installed on a mobile phone and are found to be working after installation. This does not affect your rights if the part was defective upon arrival.
6. Exchanges
The fastest way to ensure you get what you want is to return the item you have following the process above. Once the return is accepted and processed, you can make a separate purchase for the new item.
7. Refunds
We will notify you once we’ve received and inspected your return and let you know if the refund was approved based on the policy conditions. If approved, we will issue the refund to your original payment method within 5-7 business days. Please note that it may take additional time for your bank or credit card company to process and post the refund to your account.
8. Cancellation Policy
You can request to cancel your order by emailing us at sales@pmcjewellery.co.za.
- Before Shipping: We can only guarantee cancellation if your order has not yet been shipped.
- After Shipping: Once an order has shipped, it cannot be cancelled. If you wish to return the order, you must wait to receive it and then initiate a return through our portal. Such returns will be treated as 'Change of Mind' returns.
You can always contact us for any return questions at our help center.
Description
Description
1. XCore407I is an STM32 MCU core board that features the STM32F407IGT6 on board.
2. Clock circuit, USB power management
3. Onboard devices: USB HS PHY, Ethernet PHY, 1G Bit NandFlash
4. Connectors:USB HS (mini / type A), USB FS (mini), Ethernet (RJ45)
5. All the idle I/O ports are accessible on the pin headers
6. 2.0mm pin header pitch, smaller size, easier to integrate into user system
7. Note : please consider the EVK407I, which supports easily programing/debugging.
What is On Board
STM32F407IGT6 development board on board resource
1. STM32F407IGT6: The high performance STM32 MCU which features:
- Core: Cortex-M4 32-bit RISC
- Feature: a full set of single-cycle DSP instructions
- Operating Frequency: 168MHz, 210 DMIPS/1.25 DMIPS/MHz
- Operating Voltage: 1.8V-3.6V
- Package: LQFP176
- Memories: 1024kB Flash, 192+4kB SRAM
- MCU communication Interfaces:
-- 3 x SPI, 4 x USART, 2 x UART, 2 x I2S, 3 x I2C
-- 1 x FSMC, 1 x SDIO, 2 x CAN
-- 1 x USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, ULPI and on-chip full-speed PHY
-- 1 x 10/100 Ethernet MAC
-- 1 x 8 to 14-bit parallel camera interface
- AD & DA converters: 3 x AD (12-bit, 1μs, shares 24 channels); 2 x DA (12-bit)
- Debugging/Programming: supports JTAG/SWD (serial wire debug) interfaces, supports IAP
2. MIC2075-2, onboard USB FS power management device
3. AMS1117-3.3, 3.3V voltage regulator
4. K9F1G08U0E, 1G Bit NandFlash
5. DP83848, Ethernet PHY
6. MIC2075-1, onboard USB HS power management device
7. USB3300, USB HS PHY
8. Power supply switch, powered from 5Vin or USB connection
9. Boot mode switch, for configuring BOOT0 pin
10. Power indicator
11. USB FS LED
12. USB HS LED
13. Reset button
14. 8M crystal, MCU clock, enables the MCU run at higher speed by frequency multiplication
15. 24M crystal, USB3300 clock
16. 50M crystal, DP83848 clock
17. 32.768K crystal, for internal RTC with calibration
18. Ethernet connector
19. USB FS mini connector
20. USB HS mini connector
21. USB HS type A connector
22. MCU pins expander, VCC, GND and all the idle I/O ports are accessible on expansion connectors for further expansion
23. USB OTG/HOST jumper
24. VREF/VBAT jumper
25. Ethernet I/O selection solder joint
26. USB HS I/O selection solder joint
27. PDR selection solder joint: 1.8-3.6V, -40~105℃ OR 1.7-3.6V, 0~70℃
Package Contents
1. XCore407I development board x 1
2. USB type A to Mini-B cable x 1
3. Software CD x 1
Delivery Process
Delivery Process
✓ FREE SHIPPING - No shipping fees charged
✓ International Delivery - Ships from our overseas warehouse
✓ Processing Time - 1-3 days handling time
✓ Estimated Delivery - 6-13 business days total
How It Works:
- Orders placed before 2:00 PM SAST (Monday-Friday) begin processing the same day
- Orders after 2:00 PM or on weekends/holidays process the next business day
- Delivered via private courier with SMS, email, and WhatsApp tracking updates
- If courier cannot reach you, order may be sent to nearest PAXI collection point
- Shipping insurance included in your product price
Customs & Duties Information:
Orders up to R2000:
✓ Delivered Duty Paid (DDP) - The price you see is the final price you pay
✓ We handle all import duties, taxes, and customs clearance fees
✓ No surprise charges upon delivery
Orders over R2000:
⚠️ You will be responsible for any import duties, taxes, and customs clearance fees upon delivery
Note: Your ID information may be required for customs clearance to ensure smooth delivery.
Refunds & Returns
Refunds & Returns
At PMC TechLife, we are committed to ensuring our customers are satisfied with their purchases. Our return policy is designed to be transparent, fair, and fully compliant with South African consumer protection laws, including the Consumer Protection Act (CPA) and the Electronic Communications and Transactions Act (ECTA).
We offer distinct return processes based on the reason for your return. Please read the following sections carefully to understand your rights and the procedures for returning an item.
1. Your Right to Return Defective or Faulty Goods (6-Month Warranty)
In accordance with the Consumer Protection Act, if any product you receive is defective, faulty, unsafe, or of poor quality, you have 6 months from the date of delivery to return it. In such cases, you are entitled to a full refund, a replacement, or a repair of the item, at your choice. We will cover all costs associated with the return shipping for defective items.
To be eligible for a defective goods return:
- The return must be logged within 6 months of delivery.
- The item should be returned with all parts and original packaging where possible. We understand that discovering a defect may require opening the packaging or breaking a seal; returns for defective items will be accepted even if opened.
- Our inspection must confirm the issue was a manufacturing defect and not caused by customer misuse, improper installation, or normal wear and tear.
2. Your Right to a 'Cooling-Off' Return (Change of Mind)
In line with the Electronic Communications and Transactions Act for online purchases, you have a 7-day 'cooling-off' period. If you change your mind or ordered incorrectly, you have 7 days from the date of delivery to request a return for a refund or exchange.
To be eligible for a 'change of mind' return:
- The item must be in its original, as-new, and resalable condition, unworn and unused.
- The item must be returned in its original packaging, with all original tags and accessories included. You may open the packaging to inspect the item, but it must be returned undamaged.
- The customer is responsible for the cost of return shipping.
- Important: There are no handling or restocking fees for change-of-mind returns. You will be refunded the full purchase price, as the law grants you the right to cancel "without penalty."
3. How to Start a Return
To initiate any return, please follow these steps:
- Visit our dedicated returns portal: pmctechlife.returnscenter.com.
- Enter your order number and the email address used for the purchase.
- Follow the prompts to select the item(s) you wish to return and the reason for the return.
Once your request is submitted, we will review it. If your return is accepted, we will send you instructions on how and where to send your package. Items sent back to us without first requesting and receiving authorisation will not be accepted.
4. Exceptions & Non-Returnable Items
Please note that for 'change of mind' reasons, we cannot accept returns on the following:
- Gift cards
- Custom-ordered or personalized items
- Items specified as non-returnable for hygiene reasons (e.g., roll-on products, clothing, and personal care goods).
This does not affect your statutory right to return any item (including sale items) that is defective or faulty within 6 months of delivery.
5. Specific Product Notes
- LCD Screens: To prevent damage during installation, we strongly recommend that our LCD screens are installed by a qualified professional technician. Damage caused by improper installation is not covered under the 6-month warranty for manufacturing defects. If you believe an LCD screen was faulty upon arrival, providing an invoice from a technician can help expedite the assessment of your return claim.
- Spare Parts: Spare parts products cannot be returned if they have been installed on a mobile phone and are found to be working after installation. This does not affect your rights if the part was defective upon arrival.
6. Exchanges
The fastest way to ensure you get what you want is to return the item you have following the process above. Once the return is accepted and processed, you can make a separate purchase for the new item.
7. Refunds
We will notify you once we’ve received and inspected your return and let you know if the refund was approved based on the policy conditions. If approved, we will issue the refund to your original payment method within 5-7 business days. Please note that it may take additional time for your bank or credit card company to process and post the refund to your account.
8. Cancellation Policy
You can request to cancel your order by emailing us at sales@pmcjewellery.co.za.
- Before Shipping: We can only guarantee cancellation if your order has not yet been shipped.
- After Shipping: Once an order has shipped, it cannot be cancelled. If you wish to return the order, you must wait to receive it and then initiate a return through our portal. Such returns will be treated as 'Change of Mind' returns.
You can always contact us for any return questions at our help center.